Waters Xevo TQ-S Operator's, Overview And Maintenance Manual page 84

3 Changing the Mode of Operation
4. Using two hands, fit the ionKey source enclosure to the two supporting
studs on the source adaptor housing.
5. Swing the source enclosure to the closed position, ensuring it locks into
place.
Caution:
spectrometer,
• ensure the µSample manager's power is off before connecting the
data/power cable;
• ensure that the mass spectrometer is in Standby mode before
beginning any installation or maintenance.
84 February 28, 2014, 715002212 Rev. C
To avoid damaging the µSample manager or mass