Waters Xevo TQ-S Operator's, Overview And Maintenance Manual page 65

2. With the probe label facing you, carefully slide the IonSABRE II probe
into the hole in the probe adjuster assembly, ensuring that the probe
location dowel aligns with the probe adjuster assembly location hole.
3. Tighten the probe locking ring to secure the probe in place.
An automatic pressure test is performed when the probe is correctly
Tip:
seated in position.
Probe label
Probe location dowel
Probe adjuster assembly
location hole
TP03129
February 28, 2014, 715002212 Rev. C
APCI mode
65