Connected Port; Add/Edit Connected Ports - ZyXEL Communications XS3800-28 User Manual

Table 130 SWITCHING > Mirroring > RMirror > Destination > Add/Edit (continued)
LABEL
Clear
Cancel

43.6 Connected Port

Use this screen to select the RMirror VLAN and specify the ports that helps forward mirrored traffic to
other connected switches and/or receive mirrored traffic from other connected port in the same RMirror
VLAN.
Click SWITCHING > Mirroring > RMirror > Connected Port to display the following screen.
Figure 216 SWITCHING > Mirroring > RMirror > Connected Port (Standalone Mode)
The following table describes the labels in this screen.
Table 131 SWITCHING > Mirroring > RMirror > Connected Port
LABEL
VLAN
Connected Port
Add/Edit
Delete

43.6.1 Add/Edit Connected Ports

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > Mirroring > RMirror > Connected
Port screen to display this screen.
Chapter 43 Mirroring
DESCRIPTION
Click Clear to clear the fields to the factory defaults.
Click Cancel to not save the configuration you make and return to the last screen.
DESCRIPTION
This field displays the ID number of port mirroring VLAN over which the mirrored traffic is
forwarded.
This field displays the number of ports that helps forward mirrored traffic to other
connected switches.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
XS3800-28 User's Guide
301