Ipv6 Snooping Vlan Setup - ZyXEL Communications XS3800-28 User Manual

The following table describes the labels in this screen.
Table 345 SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snooping Policy Setup > Add/Edit
LABEL
Name
Protocol
Prefix Glean
Limit Address
Count
Apply
Clear
Cancel

84.13 IPv6 Snooping VLAN Setup

Use this screen to enable a DHCPv6 snooping policy on a specific VLAN interface. To open this screen,
click SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snp. VLAN Setup.
Figure 505
The following table describes the labels in this screen.
Table 346 SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snp. VLAN Setup
LABEL
Index
Interface
Policy
Add/Edit
Delete
Chapter 84 ARP Inspection
DESCRIPTION
Enter a descriptive name for identification purposes for this IPv6 snooping policy. You can
enter up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ].
Select DHCP to let the Switch sniff DHCPv6 packets sent from a DHCPv6 server to a DHCPv6
client.
Enable the switch button to learn the IPv6 prefix and length from DHCPv6 sniffed packets.
This is the number of IPv6 addresses and prefixes learned using the IPv6 snooping policy.
Note: The maximum limit address count is the maximum size of the IPv6 source
guard binding table. See the product data sheet for the latest specifications.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Clear to clear the fields to the factory defaults.
Click Cancel to not save the configuration you make and return to the last screen.
SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snp. VLAN Setup
DESCRIPTION
This field displays a sequential number for each binding.
This field displays the VLAN interface.
This field displays the DHCPv6 snooping policy.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
XS3800-28 User's Guide
636