Ipv6 Global Address Setup - ZyXEL Communications XS3800-28 User Manual

Table 56 SYSTEM > IPv6 > IPv6 Addressing > IPv6 Link-Local Address Setup > Edit (continued)
LABEL
Clear
Cancel

24.6 IPv6 Global Address Setup

Use this screen to view and configure the interface's IPv6 global address. Click SYSTEM > IPv6 Addressing
> IPv6 Global Address Setup to display the screen as shown next.
Figure 114 SYSTEM > IPv6 > IPv6 Addressing > IPv6 Global Address Setup
The following table describes the labels in this screen.
Table 57 SYSTEM > IPv6 > IPv6 Addressing > IPv6 Global Address Setup
LABEL
IPv6 Domain Name Server
Domain Name
Server 1/2
Apply
Cancel
IPv6 Global Address Setup
Index
Interface
IPv6 Global
Address/Prefix
Length
EUI-64
Chapter 24 IPv6
DESCRIPTION
Click Clear to clear the fields to the factory defaults.
Click Cancel to not save the configuration you make and return to the last screen.
DESCRIPTION
Enter a domain name server IPv6 address in order to be able to use a domain name instead of an
IP address.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click this to reset the Domain Name Server values in this screen to their last-saved values.
This is the interface index number.
This is the name of the IPv6 interface you created.
This field displays the IPv6 global address and prefix length for the interface.
This shows whether the interface ID of the global address is generated using the EUI-64 format.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
XS3800-28 User's Guide
172