ZyXEL Communications XS3800-28 User Manual page 719

Figure 573 SWITCHING > Mirroring
The following table describes the labels in this screen.
Table 387 SWITCHING > Mirroring
LABEL DESCRIPTION
Active Enable the switch button to activate port mirroring on the Switch. Disable the switch to disable the
feature.
Monitor The monitor port is the port you copy the traffic to in order to examine it in more detail without
Port interfering with the traffic flow on the original ports. Type the port number of the monitor port.
In Stacking mode, the first box field is the slot ID and the second field is the port number.
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Mirrored Select this option to mirror the traffic on a port.
Direction Specify the direction of the traffic to mirror by selecting from the drop-down list box. Choices are
Egress (outgoing), Ingress (incoming) and Both.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields.
Chapter 88 Networked AV Mode
XS3800-28 User's Guide
719