Private Vlan Status - ZyXEL Communications XS3800-28 User Manual

The following table describes the labels in this screen.
Table 200 SWITCHING > VLAN > VLAN Status > VLAN Status Details
LABEL
VID
Slot
Elapsed Time
Status
Port Number

Private VLAN Status

This section show private VLAN information for the selected VLAN.
Primary
VLAN
Secondary
VLAN
Type
Port List
57.4 Private VLAN Status
Use this screen to view all private VLANs created on the Switch. Click SWITCHING > VLAN > VLAN Status >
Private VLAN Status to see the following screen.
Figure 313 SWITCHING > VLAN > VLAN Status > Private VLAN Status
Chapter 57 VLAN
DESCRIPTION
This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
'Slot' refers to a Switch in the 'virtual chassis' stack. This field displays the slot ID of the stacked
Switch.
This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
This field shows how this VLAN was added to the Switch.
• Dynamic – using GVRP
• Static – manually added as a normal VLAN
• Private – manually added as a private VLAN (primary, isolated or community)
• RMirror – manually added as a remote port mirroring VLAN
• MVR – added through Multicast VLAN Registration (MVR)
This section displays the ports that are participating in a VLAN. A tagged port is marked as T, an
untagged port is marked as U and ports not participating in a VLAN are marked as "–".
This field shows the primary VLAN ID in the selected VLAN.
This field shows the secondary VLAN ID in the selected VLAN.
This field shows the type of private VLAN: Primary, Community or Isolated.
This shows the ports mapped to the private VLAN using the SWITCHING > Private VLAN or
SWITCHING > VLAN > VLAN Setup > Static VLAN screen.
XS3800-28 User's Guide
418