Ipv6 Router Discovery Setup - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch
Hide thumbs Also See for XS3800-28:
Table of Contents

Advertisement

Table 60 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Neighbor Discovery Setup > Edit (continued)
LABEL
NS Interval
Reachable
Time
Apply
Clear
Cancel

24.8 IPv6 Router Discovery Setup

Use this screen to configure router discovery settings for each interface. Click SYSTEM > IPv6 > IPv6
Neighbor Discovery > IPv6 Router Discovery Setup to display the screen as shown next.
Figure 118 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Router Discovery Setup
The following table describes the labels in this screen.
Table 61 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Router Discovery Setup
LABEL
Index
Interface
Flags
Minimum Interval
Maximum Interval
Lifetime
Suppress
Edit
Chapter 24 IPv6
DESCRIPTION
Specify the time interval (from 1000 to 3600000 milliseconds) at which neighbor solicitations are re-
sent for this interface.
Specify how long (from 1000 to 3600000 milliseconds) a neighbor is considered reachable for this
interface.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Clear to clear the fields to the factory defaults.
Click Cancel to not save the configuration you make and return to the last screen.
DESCRIPTION
This is the interface index number.
This is the name of the IPv6 interface you created.
This field displays whether IPv6 hosts use DHCPv6 to obtain IPv6 stateful addresses (M) and/
or additional configuration settings (O).
This field displays the minimum time interval at which the Switch sends router
advertisements for this interface.
This field displays the maximum time interval at which the Switch sends router
advertisements for this interface.
This field displays how long the router in router advertisements can be used as a default
router for this interface.
This field displays whether the Switch sends router advertisements and responses to router
solicitations on this interface (ON) or not (OFF).
Select an entry's check box to select a specific entry.
Click Edit to edit the selected entry.
XS3800-28 User's Guide
175

Advertisement

Table of Contents
loading

Table of Contents