Add/Edit A Voice Vlan - ZyXEL Communications XS3800-28 User Manual

Table 210 SWITCHING > VLAN > Voice VLAN Setup (continued)
LABEL
Apply
Cancel
Voice VLAN OUI Setup
Index
OUI Address
OUI Mask
Description
Add/Edit
Delete

57.12.1 Add/Edit a Voice VLAN

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > VLAN > Voice VLAN Setup
screen to display the configuration screen.
Figure 330 SWITCHING > VLAN > Voice VLAN Setup > Add/Edit
The following table describes the fields in the above screen.
Table 211 SWITCHING > VLAN > Voice VLAN Setup > Add/Edit
LABEL
OUI Address
OUI Mask
Description
Apply
Chapter 57 VLAN
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this section afresh.
This field displays the index number of the Voice VLAN.
This field displays the OUI address of the Voice VLAN.
This field displays the OUI mask address of the Voice VLAN.
This field displays the description of the Voice VLAN with OUI address.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entry.
DESCRIPTION
Enter the IP phone manufacturer's OUI MAC address. The first 3 bytes is the manufacturer
identifier, the last 3 bytes is a unique station ID.
Enter the mask for the specified IP phone manufacturer's OUI MAC address to determine
which bits a packet's MAC address should match.
Enter "f" for each bit of the specified MAC address that the traffic's MAC address should
match. Enter "0" for the bits of the matched traffic's MAC address, which can be of any
hexadecimal characters. For example, if you set the MAC address to 00:13:49:00:00:00
and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56
matches this criteria.
Enter a description up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], or [ " ] for the
Voice VLAN device. For example: Siemens.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
XS3800-28 User's Guide
433