Add/Edit Dhcp Snooping Vlan Ports - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Figure 485 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. VLAN Port Setup

The following table describes the labels in this screen.

Table 330 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. VLAN Port Setup

Profile Name

83.6.1 Add/EDIT DHCP Snooping VLAN Ports

Use this screen to apply a different DHCP option 82 profile to certain ports in a VLAN.

Click Add/Edit, or select an entry and click Add/Edit in the SECURITY > IPv4 Source Guard > DHCP

Snooping > DHCP Snp. VLAN Port Setup screen to display this screen.

Figure 486 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. VLAN Port Setup > Add/Edit

The following table describes the labels in this screen.

Table 331 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. VLAN Port Setup > Add/Edit

Chapter 83 DHCP Snooping

This field displays a sequential number for each entry.

This field displays the VLAN to which the ports belongs.

This field displays the ports to which the Switch applies the settings. In Stacking mode, the first

number represents the slot and the second the port number.

This field displays the DHCP option 82 profile that the Switch applies to the ports.

Click Add/Edit to add a new entry or edit a selected one.

Click Delete to remove the selected entries.

Enter the ID number of the VLAN you want to configure here.

Enter the number of ports to which you want to apply the specified DHCP option 82 profile.

You can enter multiple ports separated by (no space) comma (,) or hyphen (-) for a range.

For example, enter "3-5" for ports 3, 4, and 5. Enter "3,5,7" for ports 3, 5, and 7.

In Stacking mode, the first number represents the slot and the second the port number. Enter

1/1-1/24,2/23 for ports 1 to 24 for the Switch in slot 1 and port 23 for the Switch in slot 2, for

XS3800-28 User's Guide