ZyXEL Communications XS3800-28 User Manual page 103

Figure 58 Tutorial: Enable Auto Configuration
Go to the SYSTEM > IP Setup > IP Setup screen. Click the Add/Edit button in the IP Interface table to open
3
the configuration screen.
Select DHCP Client.
4
If you want to load the auto configuration file with DHCP option 60 enabled and a Vendor Class
5
Identifier assigned when you reboot the Switch, follow the instruction below. Otherwise, skip this step. In
the SYSTEM > IP Setup > IP Setup > Add/Edit screen, select the check box in the Option-60 field. Enter a
Vendor Class Identifier in the Class-ID field, and specify the VLAN interface in the VID field. In this
example, we use "ZyxelCorp" and VID 1. Click Apply.
Figure 59 Tutorial: Enable DHCP Client & Option 60
You need to save the current configuration in a configuration file, so the Switch will load the auto
6
configuration file from the TFTP server automatically when rebooting. Go to the MAINTENANCE >
Configuration > Save Configuration screen. Click the Config 1, Config 2, or Custom Default button.
Click the same button in the MAINTENANCE > Reboot System screen to reboot the Switch, and load the
7
auto configuration setting as configured before. For example, if you save the auto configuration setting
to Config 1, you need to click the Config 1 button in the Reboot System screen.
Chapter 6 Tutorials
XS3800-28 User's Guide
103