How To Configure The Switch With A Port Name To Quickly Identify Directly Connected Devices - ZyXEL Communications GS2210 series Handbook

1.7 How to configure the switch with a port name to quickly
identify directly connected devices
The example shows administrators how to configure the switch with a
port name to quickly identify directly connected devices. By doing this,
administrators and quickly identify which port connects to which device,
location, or section of the network.
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using XGS4600-32 (Firmware Version: V4.50).
Configure the port name of the switch
www.zyxel.com
38/215