ZyXEL Communications XS3800-28 User Manual page 457

Table 228 SWITCHING > VLAN Stacking > Selective QinQ > Add/Edit (continued)
LABEL DESCRIPTION
SPVID SPVID is the service provider's VLAN ID (the outer VLAN tag). Enter the service provider ID (from 1 to
4094) for frames received on this port.
Priority Select a priority level (from 0 to 7). This is the service provider's priority level that adds to the frames
received on this port.
"0" is the lowest priority level and "7" is the highest.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Clear Click Clear to clear the fields to the factory defaults.
Cancel Click Cancel to not save the configuration you make and return to the last screen.
Chapter 60 VLAN Stacking
XS3800-28 User's Guide
457