ZyXEL Communications XS3800-28 User Manual page 302

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Figure 217 SWITCHING > Mirroring > RMirror > Connected Port > Add/Edit (Standalone Mode)

Figure 218 SWITCHING > Mirroring > RMirror > Connected Port > Add/Edit (Stacking Mode)

The following table describes the labels in this screen.

Table 132 SWITCHING > Mirroring > RMirror > Connected Port > Add/Edit

RMirror VLAN ID

Select the RMirror VLAN over which the mirrored traffic is forwarded.

This field appears only in Stacking mode. Click the drop-down list to choose the slot

number of the Switch in a stack.

This field displays the port number. In Stacking mode, the first number represents the slot ID

and the second is the port number. Please note that the default stacking ports (the last

four ports of your Switch) cannot be configured. They are reserved for stacking only.

Chapter 43 Mirroring

XS3800-28 User's Guide

Troubleshooting