Connected Port - ZyXEL Communications XGS3700-48 User Manual

The following table describes the labels in this screen.
Table 72 Advanced Application > Mirroring > RMirror > Destination
LABEL
RMirror VLAN ID
Monitor Port
Tagging
Apply
Cancel
VLAN
Monitor Port
Tagging
Delete
Cancel

14.1.5 Connected Port

Use this screen to select the RMirror VLAN and specify the port(s) that helps forward mirrored
traffic to other connected switches and/or receive mirrored traffic from other connected port in the
same RMirror VLAN.
Click the Connected Port link in the RMirror screen. The following screen opens.
Chapter 14 Mirroring
DESCRIPTION
Select the RMirror VLAN over which the mirrored traffic is forwarded.
Specify the port to which you copy the traffic in order to examine it in more detail
without interfering with the traffic flow on the original port(s).
Select whether to add the RMirror VLAN tag to mirrored traffic on the monitor port.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the nonvolatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
This field displays the ID number of RMirror VLAN over which the mirrored traffic is
forwarded.
This field displays the number of port that receives the mirrored traffic from the source
device for analysis.
This field displays whether the mirrored traffic is tagged with the RMirror VLAN ID.
Check the rule(s) that you want to remove in the Delete column and then click the
Delete button.
Click Cancel to begin configuring this screen afresh.
GS3700/XGS3700 Series User's Guide
171