Technical Reference - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Figure 520 SECURITY > Port Authentication > Compound Authentication Mode (Stacking Mode)

The following table describes the labels in this screen.

Table 352 SECURITY > Port Authentication > Compound Authentication Mode

Authentication

85.6 Technical Reference

This section provides technical background information on the topics discussed in this chapter.

Chapter 85 Port Authentication

This field appears only in Stacking mode. Click the drop-down list to choose the slot number of

the Switch in a stack.

This field displays the port number. In Stacking mode, the first number represents the slot ID and

the second is the port number. Please note that the default stacking ports (the last four ports of

your Switch) cannot be configured. They are reserved for stacking only.

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row first to set

the common settings and then make adjustments on a port-by-port basis.

Changes in this row are copied to all the ports as soon as you make them.

Specify how the Switch authenticates clients for network access.

Select Strict to allow network access to clients only when clients passes IEEE 802.1x

authentication AND MAC authentication at the same time.

Select Loose to allow network access to clients when clients passes IEEE 802.1x authentication

OR MAC authentication.

Click Apply to save your changes to the Switch's run-time memory. The Switch loses these

changes if it is turned off or loses power, so use the Save link on the top navigation panel to

save your changes to the non-volatile memory when you are done configuring.

Click Cancel to begin configuring this screen afresh.

XS3800-28 User's Guide