ZyXEL Communications XS3800-28 User Manual page 261

Figure 180 PORT > OAM > OAM Status (Standalone Mode)
Figure 181 PORT > OAM > OAM Status (Stacking Mode)
The following table describes the fields in the above screen.
Table 114 PORT > OAM > OAM Status
LABEL DESCRIPTION
SLOT This field appears only in Stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
Local
This section displays information about the ports on the Switch.
Port This field displays the port number. In Stacking mode, the first number represents the slot ID
and the second is the port number. Please note that the default stacking ports (the last
four ports of your Switch) cannot be configured. They are reserved for stacking only.
Mode This field displays the operational state of the port when OAM is enabled on the port.
Active – Allows the port to issue and respond to Ethernet OAM commands.
Passive – Allows the port to respond to Ethernet OAM commands.
Chapter 36 OAM
XS3800-28 User's Guide
261