Clustering Management Setup - ZyXEL Communications XS3800-28 User Manual

Click MAINTENANCE > Cluster Management in the navigation panel to display the following screen.
Note: A cluster can only have one manager.
Figure 529 MAINTENANCE > Cluster Management > Cluster Management Status
The following table describes the labels in this screen.
Table 360 MAINTENANCE > Cluster Management > Cluster Management Status
LABEL
Status
Manager
The Number Of
Member
Index
MAC Address
Name
Model
Status

87.6 Clustering Management Setup

Use this screen to configure clustering management. Click MAINTENANCE > Cluster Management >
Cluster Management Setup to display the next screen.
Chapter 87 MAINTENANCE
DESCRIPTION
This field displays the role of this Switch within the cluster.
Manager
Member (you see this if you access this screen in the cluster member Switch directly and not
through the cluster manager)
None (neither a manager nor a member of a cluster)
This field displays the cluster manager Switch's hardware MAC address.
This field displays the number of switches that make up this cluster. The following fields describe
the cluster member switches.
You can manage cluster member switches through the cluster manager Switch. Each number in
the Index column is a hyperlink leading to the cluster member Switch's Web Configurator.
This is the cluster member Switch's hardware MAC address.
This is the cluster member Switch's System Name.
This field displays the model name.
This field displays:
Online (the cluster member Switch is accessible)
Error (for example the cluster member Switch password was changed or the Switch was set as
the manager and so left the member list, and so on)
Offline (the Switch is disconnected – Offline shows approximately 1.5 minutes after the link
between cluster member and manager goes down)
XS3800-28 User's Guide
669