Add/Edit Mvr - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Click SWITCHING > Multicast > MVR to display the screen as shown next.

Note: You can create up to five multicast VLANs and up to 256 multicast rules on the Switch.

Note: Your Switch automatically creates a static VLAN (with the same VID) when you create

a multicast VLAN in this screen.

Figure 240 SWITCHING > Multicast > MVR

The following table describes the related labels in this screen.

Table 149 SWITCHING > Multicast > MVR

Receiver Port

802.1p Priority

44.12.1 Add/Edit MVR

Use this screen to create or edit multicast VLANs and select the receiver ports and a source port for

each multicast VLAN.

To access this screen, click Add/Edit or select an existing entry and click Add/Edit in the SWITCHING >

Multicast > MVR screen.

Chapter 44 Multicast

This field displays the multicast VLAN ID.

This field displays whether the multicast group is enabled or not.

This field displays the descriptive name for this setting.

This field displays the MVR mode.

This field displays the source port numbers.

This field displays the receiver port numbers.

This field displays the priority level.

Select an entry's check box to select a specific entry. Otherwise, select the check box in the

table heading row to select all entries.

Click Add/Edit to add a new multicast VLAN or edit a selected one.

Select the entries that you want to remove, then click Delete to delete multicast VLANs.

XS3800-28 User's Guide