Zon Utility - ZyXEL Communications XS3800-28 User Manual

Table 3 Management Method Comparison
MODE
Cloud mode
Note: The Web Configurator (Local GUI) of Cloud mode supports limited features for troubleshooting
use only.
Standalone
mode
From Nebula-managed to Standalone
To return to direct management standalone mode, remove (unregister) the Switch from the inventory in
the Nebula web portal.
Note: When you change the Switch's management mode from Nebula-manged mode to
standalone mode, the Switch will reboot and restore its factory-default settings.
To unregister the Switch:
Go to the Nebula Control Center (https://nebula.zyxel.com).
1
Go to the Organization-wide > License & inventory > Devices screen.
2
Select the Switch you want to remove (unregister) from the organization.
3
Click Actions, then click Remove from organization.
4
It will take a while for the Switch to reboot and reset to factory default.

1.1.6 ZON Utility

With its built-in Web Configurator, including the Neighbor Management feature
121), viewing, managing and configuring the Switch and its neighboring devices is simplified.
In addition, Zyxel offers a proprietary software program called Zyxel One Network (ZON) Utility, it is a
utility tool that assists you to set up and maintain network devices in a more simple and efficient way.
You can download the ZON Utility at www.zyxel.com and install it on a PC (Windows operation system).
For more information on ZON Utility see
The following table shows which firmware version supports ZON and Neighbor Management (Smart
Connect) for each Switch. The firmware on each Switch is identified by the firmware trunk version,
followed by a unique model code and release number in brackets. For example, 4.70(ABML.0) is a
Chapter 1 Getting to Know Your Switch
ACCESS LOGIN USER NAME
NCC (Nebula myZyxel account
Control Center) name
portal
Web admin
Configurator
(Local GUI)
Web admin
Configurator
Section 4.3 on page
XS3800-28 User's Guide
LOGIN PASSWORD
myZyxel account
password
Local credentials
password
1234
60.
35
LOGIN IP ADDRESS/URL/
DOMAIN NAME
https://nebula.zyxel.com
http://setup.zyxel
OR
http://DHCP-assigned IP
OR
a configured static IP address
http://setup.zyxel
OR
http://DHCP-assigned IP
OR
http://192.168.1.1
(Section 13.1 on page