ZyXEL Communications XS3800-28 User Manual page 196

Table 77 SNMP Interface Traps (continued)
OPTION OBJECT LABEL
lldp lldpRemTablesChange
transceiver- zyTransceiverDdmiTemperatur
ddm eOutOfRange
zyTransceiverDdmiTxPowerOut
OfRange
zyTransceiverDdmiRxPowerOut
OfRange
zyTransceiverDdmiVoltageOut
OfRange
zyTransceiverDdmiTxBiasOutOf
Range
zyTransceiverDdmiTemperatur
eOutOfRangeRecovered
zyTransceiverDdmiTxPowerOut
OfRangeRecovered
zyTransceiverDdmiRxPowerOut
OfRangeRecovered
zyTransceiverDdmiVoltageOut
OfRangeRecovered
zyTransceiverDdmiTxBiasOutOf
RangeRecovered
Storm-control zyPortStormControlTrap
zuld zyZuldUnidirectionalDetected
zyZuldBidirectionalRecovered
flex-link zyFlexLinkPortStateChange
Chapter 26 SNMP
OBJECT ID
1.0.8802.1.1.2.0.0.1
1.3.6.1.4.1.890.1.15.
3.84.3.1
1.3.6.1.4.1.890.1.15.
3.84.3.2
1.3.6.1.4.1.890.1.15.
3.84.3.3
1.3.6.1.4.1.890.1.15.
3.84.3.4
1.3.6.1.4.1.890.1.15.
3.84.3.5
1.3.6.1.4.1.890.1.15.
3.84.3.6
1.3.6.1.4.1.890.1.15.
3.84.3.7
1.3.6.1.4.1.890.1.15.
3.84.3.8
1.3.6.1.4.1.890.1.15.
3.84.3.9
1.3.6.1.4.1.890.1.15.
3.84.3.10
1.3.6.1.4.1.890.1.15.
3.78.2.1
1.3.6.1.4.1.890.1.15.
3.110.3.1
1.3.6.1.4.1.890.1.15.
3.110.3.2
1.3.6.1.4.1.890.1.15.
3.124.4.1
XS3800-28 User's Guide
196
DESCRIPTION
The trap is sent when entries in the remote
database have any updates.
Link Layer Discovery Protocol (LLDP), defined
as IEEE 802.1ab, enables LAN devices that
support LLDP to exchange their configured
settings. This helps eliminate configuration
mismatch issues.
This trap is sent when the transceiver
temperature is above or below the normal
operating range.
This trap is sent when the transmitted optical
power is above or below the normal
operating range.
This trap is sent when the received optical
power is above or below the normal
operating range.
This trap is sent when the transceiver supply
voltage is above or below the normal
operating range.
This trap is sent when the transmitter laser
bias current is above or below the normal
operating range.
This trap is sent when the transceiver
temperature is recovered from the out of
normal operating range.
This trap is sent when the transmitted optical
power is recovered from the out of normal
operating range.
This trap is sent when the received optical
power is recovered from the out of normal
operating range.
This trap is sent when the transceiver supply
voltage is recovered from the out of normal
operating range.
This trap is sent when the transmitter laser
bias current is recovered from the out of
normal operating range.
This trap is sent when storm control is
detected on a specific port. A packet filter
action has been applied on the interface.
This trap is sent when a unidirectional link is
detected.
This trap is sent when the port which is shut
down by ZULD becomes active again.
This trap is sent when the port state of a flex
link pair changes.