Add/Edit A Dhcpv4 Option 82 Profile - ZyXEL Communications XS3800-28 User Manual

The following table describes the labels in this screen.
Table 239 NETWORKING > DHCP > DHCPv4 Relay > DHCP Option 82 Profile
LABEL
Profile Name
Circuit-ID
Enable
Field
Remote-ID
Enable
Field
Add/Edit
Delete

64.4.1 Add/Edit a DHCPv4 Option 82 Profile

Use this screen to create DHCPv4 option 82 profiles. Click Add/Edit, or select an entry and click Add/Edit
in the NETWORKING > DHCP > DHCPv4 Relay > DHCP Option 82 Profile link to display this screen.
Figure 363 NETWORKING > DHCP > DHCPv4 Relay > DHCP Option 82 Profile > Add/Edit
Note: The string of any field in this screen should not contain [ ? ], [ | ], [ ' ], [ " ] or [ , ].
The following table describes the labels in this screen.
Table 240 NETWORKING > DHCP > DHCPv4 Relay > DHCP Option 82 Profile > Add/Edit
LABEL
Name
Circuit-ID
Enable
slot-port
Chapter 64 DHCP
DESCRIPTION
This field displays the descriptive name of the profile.
This section displays the Circuit ID sub-option including information that is specific to the relay
agent (the Switch).
This field displays whether the Circuit ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Circuit ID sub-option.
This section displays the Remote ID sub-option including information that identifies the relay
agent (the Switch).
This field displays whether the Remote ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Remote ID sub-option.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
DESCRIPTION
Enter a descriptive name for the profile for identification purposes. You can use up to 32
printable ASCII characters.
Use this section to configure the Circuit ID sub-option to include information that is specific to
the relay agent (the Switch).
Select this option to have the Switch add the Circuit ID sub-option to client DHCP requests that it
relays to a DHCP server.
Select this option to have the Switch add the number of port that the DHCP client is connected
to.
XS3800-28 User's Guide
471