ZyXEL Communications XS3800-28 User Manual page 198

Table 80 SNMP Switch Traps
OPTION OBJECT LABEL
stp zyMrstpNewRoot
zyMstpNewRoot
zyMrstpTopologyChange
zyStpRootGuardDetect
zyStpRootGuardRecovered
zyMstpTopologyChange
mactable zyMacForwardingTableFull
zyMacForwardingTableFullRec
overed
rmon RmonRisingAlarm
RmonFallingAlarm
classifier zyAclV2ClassifierLogNotificatio
n
rip zyRipExceedMaxDynamicRout
e
ospf zyOspfExceedMaxDynamicRo
utePath
Chapter 26 SNMP
OBJECT ID
1.3.6.1.4.1.890.1.15
.3.52.3.1
1.3.6.1.4.1.890.1.15
.3.53.3.1
1.3.6.1.4.1.890.1.15
.3.52.3.2
1.3.6.1.4.1.890.1.15
.3.79.3.1
1.3.6.1.4.1.890.1.15
.3.79.3.2
1.3.6.1.4.1.890.1.15
.3.53.3.2
1.3.6.1.4.1.890.1.15
.3.48.2.1
1.3.6.1.4.1.890.1.15
.3.48.2.2
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
1.3.6.1.4.1.890.1.15
.3.105.4.1
1.3.6.1.4.1.890.1.15
.3.74.2.1
1.3.6.1.4.1.890.1.15
.3.57.3.1
XS3800-28 User's Guide
198
DESCRIPTION
This trap is sent when the MRSTP root switch
changes.
This trap is sent when the MSTP root switch
changes.
This trap is sent when the MRSTP topology
changes.
This trap is sent when the STP root switch
detects superior BPDUs on a root guard
enabled port and blocks the port.
This trap is sent when a port blocked by root
guard stops sending superior BPDUs and is
enabled again.
This trap is sent when the MSTP root switch
changes.
This trap is sent when more than 99% of the
MAC table is used.
This trap is sent when the MAC address
switching table has become normal from
full.
This trap is sent when a variable goes over
the RMON "rising" threshold.
This trap is sent when the variable falls below
the RMON "falling" threshold.
This trap is sent when the Switch detects
classifier log information.
This trap is sent when the maximum allowed
number of dynamic routes learned through
RIP has been exceeded.
This trap is sent when the maximum allowed
number of dynamic routes learned through
OSPF has been exceeded.