ZyXEL Communications XS3800-28 User Manual page 685

Figure 546 MAINTENANCE > Firmware Upgrade (Stacking Mode)
The top of the screen shows which firmware version is currently Running on the Switch. Click Choose File
or Browse to locate the firmware file you wish to upload to the Switch in the File Path field. Click Upgrade
to load the new firmware. The Switch does not apply the uploaded firmware immediately. Firmware
upgrades are only applied after you reboot the Switch using the uploaded firmware.
Click the Config Boot Image drop-down list box to select the boot image (Firmware1 or Firmware2) you
want the Switch to use when rebooting, click Apply. Restart the Switch (manually or using the
MAINTENANCE > Reboot System screen) to apply the firmware image you selected.
After the process is complete, see the DASHBOARD screen to verify your current firmware version
number.
Table 367 MAINTENANCE > Firmware Upgrade
LABEL DESCRIPTION
Slot This field appears only in Stacking mode.
This is the slot index number.
Name This is the name of the Switch that you are configuring.
Status This field appears only in Stacking mode.
This field displays the current stacking status on the Switch.
Chapter 87 MAINTENANCE
XS3800-28 User's Guide
685