Add/Edit Source - ZyXEL Communications XS3800-28 User Manual

Figure 210 SWITCHING > Mirroring > RMirror > Source (Standalone Mode)
The following table describes the labels in this screen.
Table 127 SWITCHING > Mirroring > RMirror > Source
LABEL
VLAN
Priority
Mirror Port
Ingress
Egress
Both
Reflector Port
Active
Port
Add/Edit
Delete

43.4.1 Add/Edit Source

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > Mirroring > RMirror > Source
screen to display this screen.
Chapter 43 Mirroring
DESCRIPTION
This field displays the ID number of RMirror VLAN over which the mirrored traffic is
forwarded.
This field displays the priority of the mirrored traffic.
This field displays the number of ports on which the incoming traffic is mirrored.
This field displays the number of ports on which the outgoing traffic is mirrored.
This field displays the number of ports on which the incoming and outgoing traffic is
mirrored.
This field displays whether the reflector port is enabled or not.
This field displays the number of reflector port in this RMirror VLAN.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
XS3800-28 User's Guide
297