Add/Edit An Ipv6 Source Guard Policy - ZyXEL Communications XS3800-28 User Manual

• If you select both Validate Prefix and Validate Address then traffic matching either IPv6 address or
prefix will be forwarded.
Figure 499
The following table describes the labels in this screen.
Table 341 SECURITY > IPv6 Source Guard > IPv6 Source Guard > IPv6 Source Guard Policy
LABEL
Index
Name
Validate Address
Validate Prefix
Link Local
Add/Edit
Delete

84.10.1 Add/Edit an IPv6 Source Guard Policy

Click Add/Edit, or select an entry and click Add/Edit in the SECURITY > IPv6 Source Guard > IPv6 Source
Guard > IPv6 Source Guard Policy screen to display this screen.
Figure 500
The following table describes the labels in this screen.
Table 342 SECURITY > IPv6 Source Guard > IPv6 Source Guard > IPv6 Source Guard Policy > Add/Edit
LABEL
Name
Validate Address
Chapter 84 ARP Inspection
SECURITY > IPv6 Source Guard > IPv6 Source Guard > IPv6 Source Guard Policy
DESCRIPTION
This field displays a sequential number for each policy.
This field displays the descriptive name for identification purposes for this IPv6 source guard
policy.
This field displays the Validate Address status for this IPv6 source guard policy.
This field displays the Validate Prefix status for this IPv6 source guard policy.
This field displays the Link Local traffic status for this IPv6 source guard policy.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
SECURITY > IPv6 Source Guard > IPv6 Source Guard > IPv6 Source Guard Policy > Add/Edit
DESCRIPTION
Enter a descriptive name for identification purposes for this IPv6 source guard policy. You can
enter up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ].
Select Validate Address to have IPv6 source guard forward valid addresses that are stored in
the binding table.
XS3800-28 User's Guide
632