ZyXEL Communications XS3800-28 User Manual page 210

Figure 141 SYSTEM > Syslog Setup
The following table describes the labels in this screen.
Table 87 SYSTEM > Syslog Setup
LABEL DESCRIPTION
Syslog Setup
Active Enable the switch button to turn on syslog (system logging) and then configure the syslog
setting.
Logging Type This column displays the names of the categories of logs that the device can generate.
Active Select this option to set the device to generate logs for the corresponding category.
Facility The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Syslog Server Setup
Index This is the index number of a syslog server entry.
Active This field displays if the device is activated to send logs to the syslog server.
IP Address This field displays the IP address of the syslog server.
UDP Port This field displays the port of the syslog server.
Log Level This field displays the severity level of the logs that the device is to send to this syslog server.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.
Chapter 29 Syslog Setup
XS3800-28 User's Guide
210