ZyXEL Communications XS3800-28 User Manual page 421

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Figure 316 SWITCHING > VLAN > VLAN Setup > Static VLAN > Add/Edit (Stacking Mode)

The following table describes the related labels in this screen.

Table 203 SWITCHING > VLAN > VLAN Setup > Static VLAN > Add/Edit

Enable the switch button to activate the VLAN settings.

Enter a descriptive name for the VLAN group for identification purposes. This name consists of up

to 64 printable ASCII characters. The string should not contain [ ? ], [ | ], [ ' ], [ " ] or [ , ].

VLAN Group ID

Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.

Note: Do NOT add a VLAN ID that has been used in the SWITCHING > VLAN > Voice

Select Normal (static) or Private. For Private VLANs, select Primary, Isolated or Community.

Primary private VLANs can associate with several (secondary) Community private VLANs and up

to one (secondary) Isolated private VLAN.

You only configure VLAN Association List for Primary private VLANs. Use a dash to associate

consecutive VLANs and a comma (no spaces) to associate non-consecutive VLANs. For

example, 51–53 includes 51, 52 and 53, but 51,53 does not include 52.

Secondary private VLANs can only be associated with one primary private VLAN.

This field appears only in Stacking mode. Click the drop-down list to choose the slot number of

the Switch in a stack.

The port number identifies the port you are configuring. In Stacking mode, the first number

represents the slot ID and the second one is the port number. Please note that the default

stacking ports (the last four ports of your Switch) cannot be configured. They are reserved for

stacking only.

Chapter 57 VLAN

XS3800-28 User's Guide

Troubleshooting