6. Remote Control
5. Use a D-sub 9-pin cross cable to connect this product to the computer. The connector is on the
rear of this product.
-------- Notes----------------------------------------------------------------------------------------------------------------
Avoid use in a place that has power fluctuation or under electrically noisy environment.
Turn off this product and the computer before connecting or disconnecting the cable.
Binary transmission is not supported.
---------------------------------------------------------------------------------------------------------------------------------
6.1.3 GPIB (Optional)
The product is compliant with the GPIB IEEE Standard 488.1-1987. The GPIB-based remote control
is available by connecting the optional GPIB interface. For the interface specifications, see 10.27.
Operation procedure
1. Press the MENU key to move to the root menu, then select [System]. The system setting
window opens.
212
PROGRAMMABLE AC POWER SOURCE