Saving Your Configuration; Navigating The Web Configurator; Figure 9-3 Bridge Setup Example - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
9.5

Saving Your Configuration

Click Apply in a configuration screen to save your changes back to the IES-1000's volatile memory. The IES-
1000 loses these changes if it is turned off or loses power. Click Config Save on the navigation panel to the left to
save your changes to the non-volatile memory when you are done configuring.
9.6

Navigating the Web Configurator

The web configurator uses multiple levels. Some features only require you to use one level. For example, to
configure General Setup, click the link on the navigation panel to open the configuration screen.
Some features use more levels.
9.6.1 Web Configurator Navigation Example
Bridge Setup has screens that allow you to configure bridging and filtering features. For example, click Bridge
Setup in the navigation panel to go to the general Bridge Setup screen (shown next).

Figure 9-3 Bridge Setup Example

9-4 Web Configurator Access and Navigation