23.1
System Commands Overview
Use the commands described in this chapter to configure system functions on the IES-1000.
23.2
Commonly Used Commands
This section shows you commonly used commands.
23.2.1
Uptime Command
Syntax:
192.168.1.1> uptime
This command shows the elapsed time the system has been running since the last reboot.
23.2.2
Version Command
Syntax:
192.168.1.1> version
This command shows the system firmware version and date
23.2.3
Restart Command
Syntax:
192.168.1.1> restart
This command instructs the system to perform a warm start, that is, restarting the system without turning the
power off and on.
23.2.4
Passwd Command
Syntax:
192.168.1.1> passwd
System Commands
System Commands
This chapter describes the IES-1000's system-related commands.
IES-1000 User's Guide
Chapter 23
23-1