Snmp Setup Screen; Figure 16-2 Snmp Setup; Table 16-2 Snmp Setup - ZyXEL Communications IES-1000 User Manual

16.2

SNMP Setup Screen

Click SNMP in the navigation panel to open the SNMP screen.
The following table describes this screen.
LABEL
Trust Host The trusted host, your IES-1000 will only respond to SNMP messages from this address. If
you leave the field set to 0.0.0.0 (default), your IES-1000 will respond to all SNMP messages
it receives, regardless of source.
Community This field displays the SNMP access entry's community (password) for the incoming requests
from the management station.
Access Right This field displays None if this SNMP access entry does not allow incoming Get and GetNext
or Set requests.
Read displays if the entry is read-only (allows incoming Get and GetNext requests).
Write displays if the entry is read-write (allows incoming Get, GetNext and Set requests).
Send Trap This field displays whether (Yes) or not (No) this SNMP access entry allows traps to be sent
to the SNMP manager.
Add Click this button to configure a new SNMP access entry.
Delete Select a SNMP access entry(s)'s Delete check box and click the Delete button to remove the
entry.
16.2.1 Add SNMP Access Entry Screen
Click an index number in the SNMP Setup screen to open this screen.
SNMP

Figure 16-2 SNMP Setup

Table 16-2 SNMP Setup

DESCRIPTION
IES-1000 User's Guide
16-3