Ieee 802.1Q Tagged Vlan Commands - ZyXEL Communications IES-1000 User Manual

2. 192.168.1.1 vlan1q> vlan enable
31.3

IEEE 802.1Q Tagged VLAN Commands

Bridge port 1 stands for the Ethernet port, bridge port 2 stands for DSL port 1, bridge port 3
31.3.1 VLAN Enable Command
The default for the IEEE 802.1Q Tagged VLAN is disabled. Enable the IEEE 802.1Q Tagged VLAN by following
the example shown next.
Syntax:
192.168.1.1 vlan1q> vlan enable
31.3.2 VLAN Disable Command
You can disable the IEEE 802.1Q Tagged VLAN by using the VLAN Disable command.
Syntax:
192.168.1.1 vlan1q> vlan disable
This command disables the IEEE 802.1Q Tagged VLAN.
31.3.3 PVID Command
Syntax:
192.168.1.1 vlan1q> pvid [<port #> <vlan id>]
where
<port #>
<vlan id>
IEEE 802.1Q Tagged VLAN Commands
stands for DSL port 2, and so on.
= A bridge port number. Valid parameter range = [1 - 9].
= The VLAN ID. Valid parameter range = [1 - 4094].
IES-1000 User's Guide
31-3