ZyXEL Communications IES-1000 User Manual page 283

IES-1000 User's Guide
Do not turn off the network module during the restore process, as it may corrupt the firmware
and make your network module unusable.
Connect to the network module with your favorite FTP client. The command for the network module is generally
C:\> ftp < network module IP address>
at the computer command prompt.
Enter the User name (just press [ENTER]).
User: <ENTER>
Enter the management password (1234 by default).
Password: 1234
230 Logged in
Transfer the configuration files to the network module
ftp> put init
Quit FTP.
ftp> quit
Wait for the update to finish. The network module will restart automatically.
35-2 Configuration Backup/Restore