ZyXEL Communications IES-1000 User Manual page 181

IES-1000 User's Guide
MODULE
chips
cpu
debug
exit
info
mem
stack
rb
rh
rw
wb
wh
ww
tell
config
list
print
reset
save
resource
22-6
Table 22-1 Commands
COMMAND
read <addr>
write <addr> <data>
<addr>
<addr>
<addr>
<addr> <data>
<addr> <data>
<addr> <data>
<process> <cmd> [<attrs>]
<module>
<module>
DESCRIPTION
Reads the MII register of the device
with the selected PHY address.
Writes data to the MII register of the
device with selected the PHY address.
Shows CPU usage.
Starts debug mode (ATMOS).
Exits the debugger (ATMOS).
Shows version information and MAC
address.
Shows memory usage on a per-
process basis.
Shows stack usage on a per-process
basis.
Reads 1 byte from the specified
address.
Reads 1 half-word from the specified
address.
Reads 1 word from the specified
address.
Writes 1 byte to the specified address.
Writes 1 half-word to the specified
address.
Writes 1 word to the specified address.
Sends a tell command to the specified
process.
Displays all registered modules.
Shows configuration information for all
modules.
Shows configuration information for
the specified module.
Resets configuration information in all
modules from nonvolatile memory.
Resets configuration information in the
specified module from nonvolatile
memory.
Saves configuration information in all
modules to nonvolatile memory.
Shows the controlled resources in all
processes.
Commands Introduction