Mounting The Ies-1000 On A Rack; Figure 4-1 Attaching The Mounting Brackets To The Ies-1000 - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
4.4.1 Attaching the Mounting Brackets to the IES-1000
Position a mounting bracket on one side of the IES-1000, lining up the four screw holes on the bracket
Step 1.
with the screw holes on the side of the unit (see the figure shown next).

Figure 4-1 Attaching the Mounting Brackets to the IES-1000

Using a #2 Philips screwdriver, install the M3 flat head screws that came with the brackets through the
Step 2.
mounting bracket holes into the IES-1000.
Repeat Step 1 and Step 2 to install the second mounting bracket on the other side of the unit.
Step 3.
You may now mount the IES-1000 on a rack. Proceed to the next section.
4.4.2

Mounting the IES-1000 on a Rack

Position a mounting bracket (that is already attached to the IES-1000) on one side of the rack, lining up
Step 1.
the two screw holes on the bracket with the screw holes on the side of the rack (see the figure shown
next).
4-2
Failure to use the proper screws may damage the unit.
Failure to use the proper screws may damage the unit.
Hardware Installation