1.4 Saving Your Configuration
When you run a command, the Switch saves any changes to its run-time memory. The Switch
loses these changes if it is turned off or loses power. Use the
enable mode to save the current configuration permanently to non-volatile memory.
sysname# write memory
You should save your changes after each CLI session. All unsaved
configuration changes are lost once you restart the Switch.
1.5 Logging Out
Enter
logout
Chapter 2 on page 17
Ethernet Switch CLI Reference Guide
to log out of the CLI. You have to be in user, enable, or config mode. See
for more information about modes.
Chapter 1 How to Access and Use the CLI
write memory
command in
15