Ac Power Model Power Connection; Figure 6-12 Stacking Multiple Ies-1000 Units - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
Connect the top ports of MDF 1 to the telephone company.
6.4.5 LAN Port (Ethernet) Connection
Connect the LAN port of your SAM1008 to an Ethernet WAN switch using a straight-through Category 5 UTP
(Unshielded Twisted Pair) cable with RJ-45 connectors. Connect the other end of the cable to an Ethernet switch.
You may stack multiple IES-1000 units up to the number of ports available on the Ethernet switch as shown next.

Figure 6-12 Stacking Multiple IES-1000 Units

6.5

AC Power Model Power Connection

Connect the female end of the power cord to the power socket on the front panel of your IES-1000 (to the right of
the fuse housing) as shown next. Connect the other end of the cord to a power outlet. Make sure that no objects
obstruct the airflow of the fans (located on the side of the unit).
Make sure you use a 100-240VAC/1A, 50/60Hz power source.
6-12 Hardware Connections