Commands - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
[on|off]
means that you can use either on or off.
5. "Command" refers to a command used in the command line interface (CI command).
Using commands not documented in this User's Guide can damage the unit and possibly render
22.3.1 Help Facility
The system includes a help facility to provide you with online assistance.
You can issue the help or help all command at any time. The system will display a list of available
commands in response.
You can issue help with a command name to get more details about it, for instance, the command
192.168.1.1> help version
yields
version
The system responds with a description of the version command.
22.3.2 Saving Your Configuration
Always remember to save your configuration using the following syntax:
192.168.1.1> config save
This command saves all system configurations into nonvolatile memory. You must use this command to save any
configurations that you make, otherwise the IES-1000 will return to its default settings when it is restarted.
Do not turn off your IES-1000 while saving your configuration.
22.4

Commands

The following table lists all of the commands that you can use with the IES-1000. Refer to the following chapters
for descriptions of commonly used commands.
This user's guide describes commands that are helpful for configuring the IES-1000.
Using commands not documented in the user's guide can damage the unit and possibly render
22-2
it unusable.
- show system software version
it unusable.
Commands Introduction