Dhcp Relay Agent Information Option; Relayinfo Enable Command; Relayinfo Disable Command - ZyXEL Communications IES-1000 User Manual

29.2.8 Status Command
Syntax:
192.168.1.1 dhcprelay> status
The command displays whether or not the DHCP relay feature is activated.
status
29.2.9 Trace Command
Syntax:
192.168.1.1 dhcprelay> trace
The command activates trace option(s).
trace
29.2.10 Untrace Command
Syntax:
192.168.1.1 dhcprelay> untrace
The un command deactivates trace option(s).
trace
29.2.11 Version Command
Syntax:
192.168.1.1 dhcprelay> version
The command displays the DHCP software version.
version
29.3

DHCP Relay Agent Information Option

Use the following commands to configure the DHCP relay agent information option feature.
29.3.1

Relayinfo Enable Command

Syntax:
192.168.1.1 dhcprelay> relayinfo enable
The
relayinfo enable
29.3.2

Relayinfo Disable Command

Syntax:
DHCP Relay Commands
command turns on the DHCP relay agent information (Option 82) feature.
IES-1000 User's Guide
29-3