Figure 18-2 Secured Client Setup; Table 18-2 Secured Client Setup - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
LABEL
Backup
Configuration
UNIX System Log
System Log IP
Address
Log Facility
Apply
Reset
18.2.1 Secured Client Screen
Click Maintenance in the navigation panel and then Secured Client in the Maintenance screen to open the
Secured Client Setup screen.
The Secured Client Setup screen configures trusted computers that may manage the IES-1000.
The following table describes this screen.
LABEL
Maintenance Click Maintenance to return to the main maintenance screen.
18-2
Table 18-1 Maintenance
Use the Backup link to save your current configuration to a computer.
Select this check box to activate syslog (UNIX system logging) and then configure the
UNIX syslog parameters described in the following fields.
Enter the IP address of the syslog server.
Select one of 7 different options from the drop-down list box. The log facility allows you to
log the message to different files in the server. Please refer to your UNIX manual for more
details.
Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000
loses these changes if it is turned off or loses power, so use the Config Save link in the
navigation panel on the left to save your changes to the non-volatile memory when you
are done configuring.
Click Reset to begin configuring this page afresh

Figure 18-2 Secured Client Setup

Table 18-2 Secured Client Setup

DESCRIPTION
DESCRIPTION
Maintenance