Log Format; Table 20-2 Log Format; Table 20-3 Log Messages - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
LABEL
Reset System Click this button to restart the IES-1000. A warning dialog box displays asking if you're sure
you want to restart the system. Click OK to proceed.
Clear System Click this button to clear the log of events in the multi-line text box.
Log
IP Type the IP address of a device that you want to ping in order to test a connection.
Ping Click this button to have the IES-1000 ping the IP address (in the field to the left) 5 times.
20.3

Log Format

The common format of the system logs is:
LABEL
<item no>
<time>
<process>
<type>
<log message>
20.3.1 Log Messages
The following table lists and describes the system log messages.
LOG MESSAGE
ADSL <port> Reset
ADSL <port> Dying-Gasp
ADSL Link Info: <us
NM>/<ds NM>, <us
AttainableSpeed>/<ds
AttainableSpeed>
20-2
Table 20-1 Diagnostic
<item no> <time> <process> <type> <log message

Table 20-2 Log Format

This is the index number of the log entry.
This is the time and date when the log was created.
This is the process that created the log.
This identifies what kind of log it is. "INFO" identifies for an information log. "WARN"
identifies a warning log.
This is the log's detailed information (see section 20.3.1 for descriptions).

Table 20-3 Log Messages

TYPE
INFO The network module reset an ADSL port due to a software layer
error.
INFO The subscriber turned off the ADSL modem or router. The
subscriber's device must support the dying gasp feature in order for
this log to display.
INFO An ADSL port established a connection.
this line
for this line
DESCRIPTION
DESCRIPTION
<us NM> - upstream noise margin
<ds NM> - downstream noise margin
<us AttainableSpeed> - maximum possible upstream speed for
<ds AttainableSpeed>
DESCRIPTION
- maximum possible downstream speed
>
Diagnostics