Filter Commands; Figure 28-1 Mfilter Command Example; Mac Filter Delete Command; Mfilter Command - ZyXEL Communications IES-1000 User Manual

<port>
<mac>
This command adds a source MAC address fixed on a specified port. You may add up to five MAC addresses.
28.4.5

MAC Filter Delete Command

Syntax:
192.168.1.1 bridge> macfilter delete <port> <mac>
where
<port>
<mac>
This command removes a configured source MAC address from a port specified by you.
28.5

Filter Commands

28.5.1 Filter Command
Syntax:
192.168.1.1 bridge> filter
This command displays the filtering database.
28.5.2

Mfilter Command

Syntax:
192.168.1.1 bridge> mfilter
This command displays the multicast filtering database. The mfilter command is what allows you to
monitor the IES-1000's IGMP snooping activities.
The following is an example of a multicast filtering database.
192.168.1.1 bridge> mfilter
ID VLAN ID
================================================================================
1
2
Total 2 entries.
IGMP Snooping Enabled
IGMP version 1
Query Received 949
Max Response Time 100 * 1/10 seconds
Query Interval 15 seconds
Bridge Commands
= A bridge port number.
= The source MAC address in "00:a0:c5:12:34:56" format.
= A bridge port number.
=
The source MAC address in "00:a0:c5:12:34:56" format.
GDA
0 239.255.255.250
0 224.000.001.022

Figure 28-1 Mfilter Command Example

MAC Member Ports
7f-ff-fa 1
00-01-16 1
IES-1000 User's Guide
28-3