Pvc Channels; Set Channel Command; Delete Channel Command - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
26.3

PVC Channels

Channels (also called Permanent Virtual Circuits or PVCs) let you set priorities for different services or
subscribers. You can define up to eight channels on each DSL port and use them for different services or levels of
service. You set the PVID that is assigned to untagged frames received on each channel. You also set an IEEE
802.1p priority for each of the PVIDs. In this way you can assign different priorities to different channels (and
consequently the services that get carried on them or the subscribers that use them). Use the following commands
to define channels.
26.3.1

Set Channel Command

Syntax:
192.168.1.1 adsl> set ch <port> <vpi> <vci> <pvid> <priority> <vcp name>
or:
192.168.1.1 adsl> set ch <port> <vpi> <vci> super <vcp name>
where
<port>
<vpi>
<vci>
<pvid>
<priority>
<vcp name>
super
The command creates a new PVC channel or modifies an existing one.
set ch
The following example creates a PVC channel for port 8 that uses VPI 0, VCI 33, PVID 6 IEEE 802.1p default
priority of 3 and the gold virtual channel profile.
192.168.1.1 adsl> set ch 8 0 33 6 3 gold
26.3.2

Delete Channel Command

Syntax:
192.168.1.1 adsl> delete ch <port> <vpi> <vci>
where
<port> =
A port number (1 to 8) or (*) means all 8 ports.
<vpi> = The VPI setting (0 to 255).
<vci> = The VCI setting (32 to 65535 if vpi = 0) or (1 to 65535 if the vpi does not = 0).
26-4
= A port number (1 to 8) or (*) means all 8 ports.
= The VPI setting (0 to 255).
= The VCI setting (32 to 65535 if vpi = 0) or (1 to 65535 if the vpi does not = 0).
= The default VID (0 to 4094). Each PVC must have a unique VID (since the network
module forwards traffic back to the subscribers based on the VLAN ID).
= The IEEE 802.1p default priority (0 to 7).
= A virtual channel profile's name.
= Sets this channel as the super channel for this port.
Virtual Channel Management