Figure 29-1 Pool Command Example - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
The command removes the specified DHCP server or all servers from the list of servers to which the IES-
delete
1000 relays client TCP/IP configuration requests.
29.2.4 Enable Command
Syntax:
192.168.1.1 dhcprelay> enable
This command turns on the DHCP relay feature.
29.2.5 Disable Command
Syntax:
192.168.1.1 dhcprelay> disable
This command turns off the DHCP relay feature.
29.2.6 Reset Command
Syntax:
192.168.1.1 dhcprelay> reset
The command resets and restarts the DHCP relay feature. This causes changes that you have made to the
reset
DHCP relay list to take effect.
29.2.7 Pool Command
Syntax:
192.168.1.1 dhcprelay> pool
The command shows the DHCP relay memory pool status.
pool
An example is shown next. This display shows that the entire DHCP relay memory pool is free (none of the
memory is allocated for entries).
192.168.1.1 dhcprelay> pool
DHCP relay Memory Pool Status
total pool size
free
allocated
mean alloc chunk 0
max free chunk
29-2
19968
19968
0
19952

Figure 29-1 Pool Command Example

DHCP Relay Commands