Secured Host Commands; Secured Host Add Command; Secured Host Delete Command - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
where
<chassis number>=
This command sets a number to identify this IES-1000 in a network. This is an optional parameter to help
network administrators keep track of multiple IES-1000s. Enter the command without the chassis number to
display the IES-1000's chassis number.
23.4

Secured Host Commands

Allow up to ten remote administrators to access your IES-1000 via IP addresses you specify.
23.4.1 Secured Host Command
Syntax:
192.168.1.1 sys> secured host [<mode>]
where
<mode>
This command enables/disables the secured host function. To display current secured host settings, simply
enter the command secured host.
23.4.2

Secured Host Add Command

Syntax:
192.168.1.1 sys> secured host add <host IP>
where
<host IP>
This command adds the IP address of a secured host. You may add up to ten IP addresses.
23.4.3

Secured Host Delete Command

Syntax:
192.168.1.1 sys> secured host delete <host IP>
where
<host IP>
This command deletes the IP address of a previously added secured host.
23-4
The number for this IES-1000 chassis (1 to 64).
= "enable" or "disable".
If <mode>= disable (default), then anyone may access your IES-1000.
If <mode>= enable, then only those computers with IP addresses specified by
you may access your IES-1000 (refer to the Secured Host Add command).
= The IP address of a secured host.
=
The IP address of a secured host.
System Commands