IES-1000 User's Guide
7.
Select Normal Bootp to enable normal BOOTP/TFTP functions.
8.
Restart the network module and press any key within three seconds to get the following screen.
SDRAM Testing ...
Mac address 00:A0:C5:12:34:56
9.
Press any key at the "Press any key within 3 seconds to enter debug mode
.................." message, to enter the debug mode.
36-4
Figure 36-3 Database Edit Dialog
Figure 36-4 Enable BOOTP/TFTP
Figure 36-5 Enter Debug Mode
Firmware Upload and Recovery