Figure 12-5 G.shdsl Port Setup; Table 12-5 G.shdsl Port Setup - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
The following table describes this screen.
LABEL
Channel Setup Click this link to go to the port's Channel Setup screen.
Port Setup Click this link to go to the Port Setup screen.
Name Type a name to identify this port.
Active Select this check box to turn on this G.SHDSL port. The G.SHDSL ports are disabled by
default because an enabled but disconnected G.SHDSL port generates more heat than an
operating port. Disable G.SHDSL ports when they are not in use to minimize heat generation
and enhance reliability.
Default 802.1p Type the priority value (0 to 7) to add to incoming frames without a (IEEE 802.1p) priority tag.
Priority
Profile Use the drop-down list box to select a profile to assign to this port.
12-8

Figure 12-5 G.SHDSL Port Setup

Table 12-5 G.SHDSL Port Setup

DESCRIPTION
G.SHDSL Module Port Setup