ZyXEL Communications IES-1000 User Manual page 187

IES-1000 User's Guide
MODULE
loopback
stat
clear
gshdsl
config
enable
disable
lineinfo
lineperf
set
22-12
Table 22-1 Commands
COMMAND
<portNo> local | f5
ch <port> <vpi> <vci>
chs [<start port> [<end port>]] Shows the statistics of all PVC
ch <port> <vpi> <vci>
chs [<start port> [<end port>]] Clears the statistics of all PVC
save
ch <port> <vpi> <vci>
chs [<start port> [<stop
port>]]
port <portNo>
ports
ch <port> <vpi> <vci>
chs [<start port> [<stop
port>]]
port <portNo>
ports
<portNo>
<portNo>
ch <port> <vpi> <vci> <pvid>
<priority> <vcp name>
ch <port> <vpi> <vci> super
<vcp name>
profile <profile name> <Cmax>
[<Cmin>] [annexA | annexB]
port <portNo> <profile>
ports <profile>
DESCRIPTION
Does a local/OAM F5 loopback test on
the specified GSHDSL port.
Shows the statistics of the specified
PVC channel.
channels in all ports or in the specified
port.
Clears the statistics of the specified
PVC channel.
channels in all ports or in the specified
port.
The gshdsl commands apply to the
SAM module.
Saves configuration of GSHDSL
module to nonvolatile memory.
Enables the specified PVC channel(s).
Enables all PVC channels for specific
ports.
Enables the specified GSHDSL port.
Enables all GSHDSL ports.
Disables the specified PVC
channel(s).
Disables all PVC channels for the
specified ports.
Disables the specified GSHDSL port.
Disables all GSHDSL ports.
Shows the statistics of the specified
GSHDSL ports.
Shows the line quality of the specified
GSHDSL port.
Creates a new PVC channel, or
modifies an existing one.
Creates a super channel, or modifies
an existing one.
Sets the specified profile a maximum
and a minimum rate, and a PSD
region.
Applies a specified profile setting to a
GSHDSL port.
Applies the specified profile setting to
all GSHDSL ports.
Commands Introduction