Figure 10-2 Bridge Setup; Table 10-2 Bridge Setup - ZyXEL Communications IES-1000 User Manual

The following table describes this screen.
LABEL
Operating Mode
Bridge Mode
Apply
Normal Mode
Setting
Packet Type Filter
Port Filter
MAC Filter
Getting Started Screens

Figure 10-2 Bridge Setup

Table 10-2 Bridge Setup

Choose Normal or Fast from the drop-down list box. The Normal mode supports
802.1Q tagged VLAN (enabled in VLAN Setup), which allows tagged/untagged frames to
and from all ports. The Fast mode allows tagged frames on the LAN port and untagged
frames on the ADSL ports.
Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to the left to save your changes to the non-volatile memory when you
are done configuring.
Click this link to go to a screen for editing the packet filter type for each port.
Click this link to go to a screen for editing each port's egress (outgoing) ports.
Click this link to go to a screen for editing the MAC filtering for each port.
DESCRIPTION
IES-1000 User's Guide
10-3